flywheel question
flywheel question i have an aluminum flywheel off a 2002 lingenfelter corvette and i was wondering if it can be used on a 98+ f body 6 spd. and does anybody know where i can buy the center piece of the flywheel that unscrews out of the flywheel
Is it a Fidanza flywheel? If so look at http://store.summitracing.com/partde...1&autoview=sku
They are just replacement inserts.
They are just replacement inserts.
Yep shouldn't have any compatibility issues at all. Fidanza aluminum is made to GM specs...except for the bolt holes...which are smaller for some reason. Use stock GM flywheel bolts because ARPs will not seat correctly and you can strip out your crank. The LS7 clutch should be a nice setup on a Fidanza aluminum. Nice quick revs and grippy. Have fun 
Teching In
Joined: Oct 2007
Posts: 33
Likes: 0
sorry for the hi jack, but i just got a ms4 cam and been thinking about getting a fidanza flywheel, will this help the low end at all? i guess since it revs quicker it will get in the higher rpms faster, where that cam wakes up...
