Monster stage 3
Thread Starter
12 Second Club
iTrader: (6)
Joined: Oct 2007
Posts: 126
Likes: 0
From: Shawnee (Shawmpton), OKlahoma
Monster stage 3 Well I installed my monster stage 3 clutch, and have broke it in. This thing works great!! it is the perfect mix between daily driver and a terror at the track! Steve @ SNL bent over backwards to ensure that everything worked right and that I was satisfied. I am very satisfied and would recomend this clutch to everyone in need. It is gentle on the way to work but lets you know its there when it buisness time! Thanks a million Steve!!!
SO far with my moster stage 3, I too have been very happy... very light chatter during break in.. after, under 100 miles already chatter was gone..
I recently glazed over my clutch (I think) , because during the burnout when I was racing, they had to clean the track and when I went to burnout the 2nd time, I was a bit on the clutch pedal and it burned the clutch and I think I glazed it over..and now it has chatter, but I think its slowly wearing off...
But could I have hurt the clutch in any other way?
It doesnt feel right,... through the clutch pedal I feel like its touching something, like a deep tone centrifugal contact, like its touching something as its spinning..
It could be in my head, but Im just kind of worried..
and sorry to Hijack..
I recently glazed over my clutch (I think) , because during the burnout when I was racing, they had to clean the track and when I went to burnout the 2nd time, I was a bit on the clutch pedal and it burned the clutch and I think I glazed it over..and now it has chatter, but I think its slowly wearing off...
But could I have hurt the clutch in any other way?
It doesnt feel right,... through the clutch pedal I feel like its touching something, like a deep tone centrifugal contact, like its touching something as its spinning..
It could be in my head, but Im just kind of worried..
and sorry to Hijack..
Trending Topics
I just got my stage 3 Monster in and I love it so far. I have the little bit of chatter that most have at first. I can't wait to put some more miles on it and get it broke in fully. 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Hell yes! Those two go very well together!
Keep us posted as you get the mileage on it!
You could very well have glazed the material. I am a little unclear based off of your description, however, you can give me a call at the shop and we'll discuss what happened, if you hurt it we'll get you taken care of! 
SO far with my moster stage 3, I too have been very happy... very light chatter during break in.. after, under 100 miles already chatter was gone..
I recently glazed over my clutch (I think) , because during the burnout when I was racing, they had to clean the track and when I went to burnout the 2nd time, I was a bit on the clutch pedal and it burned the clutch and I think I glazed it over..and now it has chatter, but I think its slowly wearing off...
But could I have hurt the clutch in any other way?
It doesnt feel right,... through the clutch pedal I feel like its touching something, like a deep tone centrifugal contact, like its touching something as its spinning..
It could be in my head, but Im just kind of worried..
and sorry to Hijack..
I recently glazed over my clutch (I think) , because during the burnout when I was racing, they had to clean the track and when I went to burnout the 2nd time, I was a bit on the clutch pedal and it burned the clutch and I think I glazed it over..and now it has chatter, but I think its slowly wearing off...
But could I have hurt the clutch in any other way?
It doesnt feel right,... through the clutch pedal I feel like its touching something, like a deep tone centrifugal contact, like its touching something as its spinning..
It could be in my head, but Im just kind of worried..
and sorry to Hijack..
