Scraping noise?
Thread Starter
Teching In
Joined: Dec 2005
Posts: 46
Likes: 0
From: Whidbey Is.,Wash
Scraping noise? well every once in awhile my second gear acts kinda weird...and their is some scraping noise goin on somewhere withing the tranny...but its only when i apply a slight pressure to the shifter while still in gear while driving, or on the the upshift to 2 or the downshift to first but its more of a scraping and not a grinding...
ive been reading alot of info on here and friday i will be changing my fluids and hopefully bleeding my clutch...i was wondering if that wasnt the case ...
could my short throw be installed improperly...i dont know which brand it is because it came with the car....
btw my car is a 98 z m6 with boltons and 138,000 miles and the guy put in a ls6 or ls7 clutch...i cant remember which one...
but i have only put 10,000 miles on this bad boy...thanks in advance
ive been reading alot of info on here and friday i will be changing my fluids and hopefully bleeding my clutch...i was wondering if that wasnt the case ...
could my short throw be installed improperly...i dont know which brand it is because it came with the car....
btw my car is a 98 z m6 with boltons and 138,000 miles and the guy put in a ls6 or ls7 clutch...i cant remember which one...
but i have only put 10,000 miles on this bad boy...thanks in advance
Hard to tell.. Sounds like something in the 1/2 synchro/slider.. Purhaps a worn/missing fork pad. I imagine it will only get worse before it gets better, so plan on a teardown at your earliest convenience.
