Cant Power shift??
After every type of bleeding I have done, always started out with a new adjustment.
1. Adjust still it goes into gear without effort.
2. 6000 rpm rev test (Close if not out of threads to adjust at this point)
3. Road test
Did not measure, did not shim
Now, here is another thing I have noticed, with the clutch pedal fully released, if I rest my foot on the clutch pedal, you can feel some type of feed back through it???
Never noticed it before, but at this point I am sure I am over analyzing everything.
1. Adjust still it goes into gear without effort.
2. 6000 rpm rev test (Close if not out of threads to adjust at this point)
3. Road test
Did not measure, did not shim
Now, here is another thing I have noticed, with the clutch pedal fully released, if I rest my foot on the clutch pedal, you can feel some type of feed back through it???
Never noticed it before, but at this point I am sure I am over analyzing everything.
Ok, here is the update, I ended up having one of the bad pressure plates. Monster sent me a new pressure plate, disc and flywheel. Still breaking it in, so dont know how it shifts wot yet.
