I saw a trick on here about three months ago about taking the stock master cylinder line off a drilling it out. If anyone knows what im talkin about please help me. I finally got my cam and heads put in and I forgot all about my clutch never workin right before i started my cam swap.

 

I put that on my cardmain page ages ago.. About 1/2 way down..

http://www.cardomain.com/ride/463707/2

 

I think this is what you want: http://www.installuniversity.com/ins...sity/index.htm

Then click on install documents on the left side and scroll down to the transmission section. The write up is under Master cylinder "drill mod". You would just need the drill mod part of it.