OK just checking only!

Reply Subscribe

Thread Tools

Search this Thread

May 15, 2010 | 02:49 PM

Jrp1978

Thread Starter

TECH Resident

iTrader: (10)

Joined: Feb 2007

Posts: 854

Likes: 0

OK just checking only!

So get new clutch in @ 497 miles toook all back out snapped pics sent to steve asked if it looked ok!
Opps stg3 monster ! Steve said great ! put back together and drove it 2oo or so more miles
Figures 4 pass at coles wouldnt hurt !
It felt good all night best pass was a 6.98 @ 103 mph 1.91 short time!
Anyway !
Last pass clutch pedal felt little mushy and engagedment point was lower ! I figureed i would just ask if it was fluid heating up ! if so what is a good fluid ? what does 6.92 equal in 1/4 ?

May 15, 2010 | 05:37 PM

X-ray

TECH Enthusiast

iTrader: (6)

Joined: Apr 2010

Posts: 548

Likes: 1

From: Harrisburg, PA

According to this table:

http://www.empirenet.com/pkelley2/eight-to-quarter.htm

10.76-10.84

May 18, 2010 | 02:26 PM

Jrp1978

Thread Starter

TECH Resident

iTrader: (10)

Joined: Feb 2007

Posts: 854

Likes: 0

No one huh?

I rechanged fluid is back to normal ! What is the best fluid to put in these things seems parts store **** isnt cutting ! its was black after 5 track passed

May 18, 2010 | 03:57 PM

Grifter

TECH Fanatic

iTrader: (12)

Joined: Dec 2006

Posts: 1,524

Likes: 5

You have the stock master? If not I highly recommend getting a Tick MC.

May 18, 2010 | 04:12 PM

stoverz28

TECH Resident

iTrader: (8)

Joined: Aug 2006

Posts: 792

Likes: 6

From: Buda, Texas

If you have longtubes, then usually you need to insulate the master cyl. line or the fluid will boil. I used a heater hose and some heat reflective tape and it works great.