Why can't I find ARP spec's for flywheel/PP bolts

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2024 | 09:03 AM

#21

Notheysus

Teching In

Joined: Dec 2024

Posts: 43

Likes: 10

From: Georgia

Hi @wannafbody , I bought the bolts suggested by @LS1Formulation . Currently reevaluating if I want to install the clutch kit + bell housing or do the crank pully.

Dec 29, 2024 | 09:09 AM

#22

LS1Formulation

12 Second Club

iTrader: (14)

Joined: Apr 2006

Posts: 3,813

Likes: 1,095

From: Grand Rapids, Michigan

On bolts that short, I'd just do two passes with the torque wrench.

Dec 30, 2024 | 11:59 AM

#23

jmd

TECH Addict

iTrader: (4)

Joined: May 2002

Posts: 2,618

Likes: 36

From: T56th Street, Aridzona

^ this. Two passes is good.
https://tech.arp-bolts.com/instructions/244-2901.pdf

Quote:

Originally Posted by Notheysus

Would I need to add an extra pass to the torque sequence, like 15ftlb - 37ftlb - 74ftlb - 85ftlb or 15ftlb - 37ftlb - 85ftlb? First time doing this and I do not want to break a bolt doing it :S.