Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Might be a clutch issue..

Thread Tools
 
Search this Thread
 
Old 01-26-2004 | 10:34 PM
  #1  
SSactionLs1's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2002
Posts: 1,255
Likes: 0
From: nor cal (ripon)
Default Might be a clutch issue..

I have a spec 3, proper break in. hasnt seen the track yet. Since ive put the moser in ive heard a grind noise.. It only happens on take off SOMETIMES, and at low rpms if i gas it hard in a low gear 1-3 (rarely 3rd). I can also hear a SLIGHT nose when i change gears, like the disk is still rubbing the pp. I doubt its the tranny or rear because then it SHOULDNT only happen at those times.

any ideas?

EDIT..come to think of it...maybe it just needs to be bleed? i do notice after i freeway race the clutch feels like it engages in a diff spot

Last edited by SSactionLs1; 01-26-2004 at 11:45 PM.
Old 01-27-2004 | 02:23 AM
  #2  
SSactionLs1's Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2002
Posts: 1,255
Likes: 0
From: nor cal (ripon)
Default

well i went out and opened the clutch res.
ITS low and BLACK...i did my clutch/master/slave/drill mod about 13months ago and i cant believe how black it is... Im really starting to think thats my problem.
Old 01-27-2004 | 09:10 AM
  #3  
Bugsquawsher's Avatar
TECH Regular
iTrader: (1)
 
Joined: Dec 2002
Posts: 467
Likes: 1
From: Lexington, Texas, USA
Default

You should Change your fluid every year.
It gets black fast
If you want to do a real good job,
pull the Master , tear it open, and clean out the inside .
Other wise Just flush out the whole system with new stuff




All times are GMT -5. The time now is 06:12 AM.