Clutch install help ASAP
#1
Clutch install help ASAP
i have my car on a lift and the guy who sold me the pressure plate and disk said i needed to do something with the dowel pins in order for it to fit i dont remember what though plzzzzz help
#2
TECH Resident
iTrader: (127)
remove the dowel pins, they are not necessary. Align the clutch with the alignment tool and you will be good to go. If you are the guy I think you are, then you kept your stock flywheel and had it resurfaced. You need to pull the dowel pins out of your stock flywheel and you should be good.