LS1TECH - Camaro and Firebird Forum Discussion

Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

C6 Slave Cylinder Adapter to F-body?

Thread Tools
 
Search this Thread
 
Old 12-11-2010 | 02:39 PM
  #1  
luigiandme's Avatar
luigiandme
Thread Starter
Launching!
iTrader: (2)
 
Joined: Jun 2008
Posts: 288
Likes: 1
Default C6 Slave Cylinder Adapter to F-body?
Any companies out there make an adapter from the threaded fastener F-Body/C5 style Slave cylinder feed line to the Clip in C6 style?
Reply Like
Old 12-11-2010 | 04:13 PM
  #2  
raven154's Avatar
raven154
TECH Addict
iTrader: (14)
 
Joined: Feb 2007
Posts: 2,342
Likes: 0
From: Owasso, OK
Default
I'd be interested in the opposite. C6/CTS-V style to F-body.
Reply Like
Old 12-13-2010 | 12:00 PM
  #3  
luigiandme's Avatar
luigiandme
Thread Starter
Launching!
iTrader: (2)
 
Joined: Jun 2008
Posts: 288
Likes: 1
Default
It seems as if it would bolt right up but the bleeder wouldnt be long enough. That's an easy fix. but the actual connection from the slave line to the master line is the tough part.
Reply Like
Tags
Back to Subforum
Manual Transmission
View Next Unread
upgrade T56 transmission?




Advanced Search

All times are GMT -5. The time now is 07:34 AM.