Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Help identifying clutch & pp.

Thread Tools
 
Search this Thread
 
Old May 11, 2011 | 06:00 PM
  #1  
WeakSauce6's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2011
Posts: 79
Likes: 0
Default Help identifying clutch & pp.

So I dropped the trans planning on replacing the slave, but I guess I'll be replacing the clutch as well. Anybody have any idea what this one is? I was told the car had a stg 2 Monster. Obviously I was lied to....







I'm assuming it's stock, or stock replacement. It has Valeo stamped in the pp, but nothing at all on the clutch itself.
Reply
Old May 11, 2011 | 06:03 PM
  #2  
WeakSauce6's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2011
Posts: 79
Likes: 0
Default

I cleaned it up, but you think my slave was shot?

Reply
Old May 11, 2011 | 06:19 PM
  #3  
SNLPerformance's Avatar
FormerVendor
iTrader: (15)
 
Joined: Feb 2008
Posts: 3,335
Likes: 2
From: Ft. Worth, TX
Default

Unfortunately you are a victim of a rather large scam that is spreading. I've had numerous customers send me emails saying their Monsters failed. I ask for pictures and I typically get this or other various Chinese knock offs.

We generally get the customer taken care of with a genuine Monster and they are good to go.

Be careful what you're told, there are a few guys out there that their sales pitches start with, "It's the same as Monster but a different color and cheaper!" If you don't buy it from us or one of our dealers/distributors then it's NOT the real thing!

This appears to be a generic Valeo cover with a set of weights on the diaphragm spring, I'd say Centerforce but it's not their signature orange. Give us a call, we'll get you into a REAL Monster, and we've got them on sale!!
Reply
Old May 11, 2011 | 06:32 PM
  #4  
WeakSauce6's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2011
Posts: 79
Likes: 0
Default

I actually called and spoke to Matt earlier today. I'm thinking about just going with a stag 1 since the car only has bolt ons and a 220/220 cam. Are all the PP the same for the different stages? I have a lq9 I'm going to build into a 408 this winter and would be nice if I only had to upgrade the clutch itself.
Reply
Old May 11, 2011 | 07:12 PM
  #5  
SNLPerformance's Avatar
FormerVendor
iTrader: (15)
 
Joined: Feb 2008
Posts: 3,335
Likes: 2
From: Ft. Worth, TX
Default

If you plan on doing a 408 I wouldn't do a Level 1.

We'll go over it in more detail when you call back and order.
Reply
Old May 11, 2011 | 07:18 PM
  #6  
WeakSauce6's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2011
Posts: 79
Likes: 0
Default

I don't want to put a stg 3+ on my ls1. The 408 won't be going in my car until next summer, but I need a clutch now. I'm asking about the pp so b/c I'm hoping I can get a stg 1 now and just upgrade the clutch plate itself for the 408.

What are the weights for? Seeing them sitting **** eyed is what made me think it was no good, because the clutch grabbed fine. Could they just be taken off?

Last edited by WeakSauce6; May 11, 2011 at 08:05 PM.
Reply
Old May 11, 2011 | 08:29 PM
  #7  
raven154's Avatar
TECH Addict
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (14)
 
Joined: Feb 2007
Posts: 2,342
Likes: 0
From: Owasso, OK
Default

The weights are to pull on the fingers at higher RPM for more clamp. They will be slightly loose so honestly as long as it was performing well, I would just wait until you put the 408 in and do it all at the same time. Since the engine and the clutch will need broke in, it may give you some incentive to not beat on either one until they are both broke in. But thats just how I would do it. No sense in buying a stage one now and then spending more money on an upgrade later if the clutch is performing fine.
Reply
Old May 12, 2011 | 09:36 AM
  #8  
WeakSauce6's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2011
Posts: 79
Likes: 0
Default

So I called my local machine shop today to ask about re-surfacing my flywheel and getting the assembly balanced together. They said they had no way of balancing the flywheel w/ the pressure plate together. Where else could I get something like this done?
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

 Pouria Savadkouei
story-1

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

 Verdad Gallardo
story-2

7 Most Reliable High-Performance Engines GM Has Ever Built

 Verdad Gallardo
story-3

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-4

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-5

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-6

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-7

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-8

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-9

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo




All times are GMT -5. The time now is 09:09 PM.

story-0
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-05-28 11:05:11


VIEW MORE
story-1
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-2
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-3
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-4
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-5
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-6
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-7
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-8
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-9
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE