2nd Gear Won't Engage
#1
Staging Lane
Thread Starter
Join Date: Sep 2004
Location: arlington, wash
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gear Won't Engage
I've had this transmission in my nova for a few years now. I have never had the ability to use 2nd gear. When 2nd gear is selected nothing happens, you hear a slight whirring sound, it completely selects though. It seems almost as if the 2nd gear has all of its teeth sheared off. Im pretty sure the tranny is pre 2000. I'm getting ready to tear it down and I assume a full rebuild is necessary. All the other gears work flawlessly. Is a full rebuild needed? Could the 2nd gear's teeth really have sheared off or is it another issue?
#2
11 Second Club
iTrader: (37)
I've had this transmission in my nova for a few years now. I have never had the ability to use 2nd gear. When 2nd gear is selected nothing happens, you hear a slight whirring sound, it completely selects though. It seems almost as if the 2nd gear has all of its teeth sheared off. Im pretty sure the tranny is pre 2000. I'm getting ready to tear it down and I assume a full rebuild is necessary. All the other gears work flawlessly. Is a full rebuild needed? Could the 2nd gear's teeth really have sheared off or is it another issue?
Mike
#3
Staging Lane
Thread Starter
Join Date: Sep 2004
Location: arlington, wash
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I plan on upgrading to the stage 2 kit from Tick Performance but do I really need to replace everything? I know its good insurance if I do. Should I also upgrade to the Viper 2nd gear and new bearings? I plan on doing the rebuild myself so I can always purchase parts if they are needed. Opinions on the stage 2 kit from Tick?
#4
TECH Addict
iTrader: (4)
2nd gear got a redesign on the teeth somewhere around 2000 or so. (someone correct me on the year if needed.)
The new Viper/F-body 2nd gear + the 1/2 synchro are likely to be needed.
Regardless, you're going to have to tear it down and inspect it to see what parts are needed.
The new Viper/F-body 2nd gear + the 1/2 synchro are likely to be needed.
Regardless, you're going to have to tear it down and inspect it to see what parts are needed.