Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Bled Clutch Now Play in Top of Pedal?

Thread Tools
 
Search this Thread
 
Old 01-03-2012, 05:25 PM
  #1  
Launching!
Thread Starter
iTrader: (8)
 
strokerrace's Avatar
 
Join Date: Aug 2010
Location: Memphis
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default Bled Clutch Now Play in Top of Pedal?

I disconnected my clutch line during my motor swap (tick m/c) and bled it after I got the motor in just to be safe. Clutch was fine before but after I bled it, now it has a slight dead spot at the top...

What could have caused this? I bled 4 resevoirs full through and was using the speed bleeder line I got and a foot long of clear tubing. No air came out at all just did it to make sure and flush the fluid but now this?
Old 01-03-2012, 05:35 PM
  #2  
TECH Enthusiast
iTrader: (1)
 
WS6sleeper's Avatar
 
Join Date: Oct 2010
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
Default

Could be the clutch spring at the top of the pedal. If you still have it, that is.
Old 01-03-2012, 05:45 PM
  #3  
Launching!
Thread Starter
iTrader: (8)
 
strokerrace's Avatar
 
Join Date: Aug 2010
Location: Memphis
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

No took it off when I put the master on per tick




All times are GMT -5. The time now is 08:37 AM.