Heres the RXT clutch. Got about 480ish street miles, before going to the track. I think about 10-20 passes on slicks, not a lot of street miles, I think under 2K. Measure about .010 wear per disc, And I did about 6-7 passes on 275 DR so I was slipping it a little more then etdrags (with added PSI for spin-no bog) Never had a 2disc before, hows it looks?
Notice the 1st clutch (right disc 1st pic) was about 3/8 off the flywheel (ram) were the ID was bigger then the pad size, Not sure how much if a big deal this is or if its normal?




other sides

 

Any updates on this? Did you put it back in, rebuild it, etc?