missing bellhousing dowel

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2012 | 08:43 AM

IKnowtheFuture

Thread Starter

TECH Apprentice

iTrader: (5)

Joined: Oct 2008

Posts: 333

Likes: 0

From: Cary, NC

missing bellhousing dowel

I am missing one. was there supposed to be the passanger side dowel in the bellhousing and the driverside in the block? theres nothing on the driver side. anyone have a part number?

Jan 23, 2012 | 09:10 AM

fergymoto

12 Second Club

iTrader: (129)

Joined: Aug 2005

Posts: 2,810

Likes: 3

From: Rock Hill, SC

You can order them from Summit, Jegs, etc. Or call up the parts guy at your local dealership and he can look it up.

Jan 24, 2012 | 10:38 AM

IKnowtheFuture

Thread Starter

TECH Apprentice

iTrader: (5)

Joined: Oct 2008

Posts: 333

Likes: 0

From: Cary, NC

I found it on another thread. Thanks tho. The driver side dowel goes into the block and the passanger dowel goes in the bellhousing correct?

Jan 25, 2012 | 10:40 PM

SippiSpeedhawk

On The Tree

iTrader: (21)

Joined: Jan 2008

Posts: 169

Likes: 0

From: Moss Point, MS

I don't think it matters. My shortblock or tranny didn't come with either. I hammered both into the block and didn't have any issues. Make sure you put some anti seize on them. Will make it a lot easier whenever you have to replace your clutch.

Jan 26, 2012 | 01:32 PM

jmd

TECH Addict

iTrader: (4)

Joined: May 2002

Posts: 2,620

Likes: 36

From: T56th Street, Aridzona

two in the block. two in the trans. front adapter plate.

Jan 26, 2012 | 06:54 PM

1BAD02WS6

TECH Resident

iTrader: (-1)

Joined: May 2002

Posts: 849

Likes: 3

From: Tulsa

I'm missing both from the trans to the bell housing. Is that bad?

Jan 26, 2012 | 08:02 PM

513camarors91

Staging Lane

iTrader: (5)

Joined: Jan 2012

Posts: 59

Likes: 0

From: west chester oh

i mean i would try to find some to put in there but i don't think its going to be the end of the world either....they just aligns the trans up to the motor correctly