Fastest Six Speed List
#422
#425
TECH Junkie
iTrader: (28)
Has that Magnum been Pro-Shifted? 170mph+ in a heavy Camaro is hauling the mail!
Love the anti-lag between shifts and "bang" from the exhaust!
Love the anti-lag between shifts and "bang" from the exhaust!
8.58 @ 172.12 - 1.41 - Monster LT1-RR Twin - 427 --- Twin S485 23psi ------------ 3520 - James@ShorTuning
https://youtu.be/RIAumakyDLA
Another backing up an identical slip almost on terrible track conditions.
https://youtu.be/CknAh3MI88Y
https://youtu.be/RIAumakyDLA
Another backing up an identical slip almost on terrible track conditions.
https://youtu.be/CknAh3MI88Y
#426
9 Second Club
iTrader: (4)
First video is with the LT1-RR twin, 3.70 gear on 23psi but much better track. Second video is **** track with LT1-RR triple 3.25 gear on 28psi.
#429
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Im jelly of how well some of you manual guys can shift. It is my biggest issue.
#431
TECH Veteran
The following users liked this post:
Sprayed 99 (12-09-2019)
#434
TECH Veteran
10.58 @ 130 1.57 RPS BC2 427-N/A3600-manzo81maro
https://m.youtube.com/watch?v=daA11HytuaI
https://m.youtube.com/watch?v=daA11HytuaI
#436
10 Second Club
Join Date: Aug 2009
Location: Oshawa, Ontario, Canada
Posts: 249
Likes: 0
Received 8 Likes
on
3 Posts
thanks man! Yea suspension needs some more tuning, would love at least a 1.4x 60ft.
car trapped 133mph with 27 Hoosier QTP, but I stepped up to 28 x 10.5 M/T Stiff walls and wasnt running enough air in them, so had to pedal a bit this run
stock bottom LS7 with lightly worked stock heads, BTR stage 4 cam and MSD intake.
would love to get some Johnson short travels in it and have Mamo Port the MSD.
currently running ARH 1-7/8 headers through a catted Y pipe and 4 single cutout, but I have TSP 2 x 3.5 headers ready to go on to letr breathe a little more. Will most likely make a custom 3.5 Y pipe with dual cutouts with these
car trapped 133mph with 27 Hoosier QTP, but I stepped up to 28 x 10.5 M/T Stiff walls and wasnt running enough air in them, so had to pedal a bit this run
stock bottom LS7 with lightly worked stock heads, BTR stage 4 cam and MSD intake.
would love to get some Johnson short travels in it and have Mamo Port the MSD.
currently running ARH 1-7/8 headers through a catted Y pipe and 4 single cutout, but I have TSP 2 x 3.5 headers ready to go on to letr breathe a little more. Will most likely make a custom 3.5 Y pipe with dual cutouts with these
#437
8 Second Club
iTrader: (13)
9.39 @ 147.58 - 1.47 - Mantic twin -- 364 -- Twin VSR 7875 ------------------ 3000 - Slow Sedan
Little shakedown pass on my car first time out with it. Running low boost 9-10psi, soft timing with no intercooler, E50 fuel, 17" wheels with an ET street R radial.
https://www.youtube.com/watch?v=_3CJ...ature=youtu.be
Little shakedown pass on my car first time out with it. Running low boost 9-10psi, soft timing with no intercooler, E50 fuel, 17" wheels with an ET street R radial.
https://www.youtube.com/watch?v=_3CJ...ature=youtu.be
The following users liked this post:
ddnspider (11-21-2020)
#438
10 Second Club
iTrader: (26)
9.39 @ 147.58 - 1.47 - Mantic twin -- 364 -- Twin VSR 7875 ------------------ 3000 - Slow Sedan
Little shakedown pass on my car first time out with it. Running low boost 9-10psi, soft timing with no intercooler, E50 fuel, 17" wheels with an ET street R radial.
https://www.youtube.com/watch?v=_3CJ...ature=youtu.be
Little shakedown pass on my car first time out with it. Running low boost 9-10psi, soft timing with no intercooler, E50 fuel, 17" wheels with an ET street R radial.
https://www.youtube.com/watch?v=_3CJ...ature=youtu.be