Will the Z06 clutch hold up too......?
#1
Will the Z06 clutch hold up too......?
Iam running about 375rwhp and 365rwtq and my track days are over since I broke the ol 4.10's and my spec stage 3 has gone south!
I want to know if the Z06 clutch would hold up running the 3.42's and nitto drags out back (275/40's). Iam going to keep the car on the street and maybe down the road put some more 4.10's in...the 4.10's should make it easier on the clutch. I plan to run the car hard on the street .....races from a roll in gear ect.
I was thinking a aluminum flywheel...4.10s will be needed to live with that from day to day!
I want to know if the Z06 clutch would hold up running the 3.42's and nitto drags out back (275/40's). Iam going to keep the car on the street and maybe down the road put some more 4.10's in...the 4.10's should make it easier on the clutch. I plan to run the car hard on the street .....races from a roll in gear ect.
I was thinking a aluminum flywheel...4.10s will be needed to live with that from day to day!
#2
I would stick with another Spec stage 3.... I've got the Zoh clutch and I dont like the way it holds at all. Once it gets a little warm its pretty much done until it has cooled off for while.
#5
master of the "jack"stand
iTrader: (2)
Join Date: Nov 2001
Location: Volo, IL
Posts: 815
Likes: 0
Received 0 Likes
on
0 Posts
My Z06 slipped on bald Comp T/As with a lid/cutout car on the 1-2 shift. This was immediately after I pulled a wicked 2.2 60'. I have no faith in my Z06 clutch. I have 7k miles on the car.