t56 Clutch Slave cylinder HELP, not Bolting up
11-15-2012, 02:50 PM
#1
Teching In
Thread Starter
Join Date: Aug 2012
Location: Philadelphia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
t56 Clutch Slave cylinder HELP, not Bolting up t56 Clutch Slave cylinder HELP, not Bolting up
im doing a ls swap in my bmw and i think im missing something or I have the wrong trans.
according a few pictures ive seen the holes for mounting the slave are identical but they are in opposite place on the tranny. what makes this even weirder the holes on the trans aren't even threaded, i didnt think it was a big deal until now.
i try to matchup the holes the clutch lines face directly down and the lines would bind up or kink.
am i missing a spacer this is suppost to bolt on to or something?
the backstory on the trans, the guy i bought it from said it was matched with a older camaro with a quicktime bellhousing. he said that the trans was "new" with only 3500 miles but sat in the car for a few years, to me it looks like a rebuild. eighter way i bought the trans without a bellhousing.
i dont believe a word anyone says about a tranny unless theres paperwork to back it up.
i have a bellhousing to bolt up to a LS1
this may be simple stuff but im a noob with American cars.
im doing a ls swap in my bmw and i think im missing something or I have the wrong trans.
according a few pictures ive seen the holes for mounting the slave are identical but they are in opposite place on the tranny. what makes this even weirder the holes on the trans aren't even threaded, i didnt think it was a big deal until now.
i try to matchup the holes the clutch lines face directly down and the lines would bind up or kink.
am i missing a spacer this is suppost to bolt on to or something?
the backstory on the trans, the guy i bought it from said it was matched with a older camaro with a quicktime bellhousing. he said that the trans was "new" with only 3500 miles but sat in the car for a few years, to me it looks like a rebuild. eighter way i bought the trans without a bellhousing.
i dont believe a word anyone says about a tranny unless theres paperwork to back it up.
i have a bellhousing to bolt up to a LS1
this may be simple stuff but im a noob with American cars.
