GHall8788

I may have to replace an input shaft seal on my t56. Im new to the t56 so what does this meen? also how much would it be to replace and do you have to pull out the trans to do this?

Exidous

iTrader: (11)

The part is cheap. The trans has to come out and be taken apart. You can do it yourself. Only the front plate has to come off so it's not like a complete rebuild.

GHall8788

how much do you think for a shop to do it? the trans is already out of the car.

85MikeTPI

iTrader: (9)

Where are you in MD? I could show you how to replace it for nothing. An honest shop should be able to replace one for under $100, but then again most shops don't have the know how to open up a trans and put it back together correctly..

GHall8788

Thanks! im in Sykesville MD. i figured it should be around 100

Exidous

iTrader: (11)

If the trans is already out it's super easy. I'd take Mike up on that if you can. 8 front plate bolts, rtv and the seal is about it.

GHall8788

Great!! good to hear, i appreciate your help guys. Mike, i would really appreciate that if its not to far for you. i will atleast buy lunch haha