Has anyone used the Jegs LS1 flywheel?
07-06-2014, 11:28 AM
#1
Teching In
Thread Starter
Join Date: Dec 2010
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone used the Jegs LS1 flywheel? I'm starting to gather parts to put a 2004 5.3L mated to a Ford Tremec 3550 into my '68 Acadian. I currently run a SBC with the 3550 so I have the conversion bell housing from QuickTime.
So i'm looking for affordable flywheel options. I see on here that the Sachs 1050 is one way to go but has anyone used Jegs LS1 flywheel seen here http://www.jegs.com/i/JEGS-Performan...08#moreDetails
It looks like it has the proper dish, its drilled for 11 & 12 inch clutches, its just under 25lbs and its $105😀
Any help would be appreciated
So i'm looking for affordable flywheel options. I see on here that the Sachs 1050 is one way to go but has anyone used Jegs LS1 flywheel seen here http://www.jegs.com/i/JEGS-Performan...08#moreDetails
It looks like it has the proper dish, its drilled for 11 & 12 inch clutches, its just under 25lbs and its $105😀
Any help would be appreciated
