Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Switching from Auto to Manual

Thread Tools
 
Search this Thread
 
Old 07-06-2014 | 11:13 PM
  #1  
Mike Blanco's Avatar
Thread Starter
Launching!
 
Joined: Jun 2014
Posts: 204
Likes: 8
From: Houston
Default Switching from Auto to Manual

I am looking at a 71 Camaro for a LS swap. I would like to make this a manual transmission project. This camaro does not have a motor, but it does have the T400. All of the interior is removed and there is a hole in the floor pan where the auto gear shifter would have been.

If I were to purchase this 71 camaro would I just be able to drop the T400 and then put in the t56 or another manual trans? Or should I just find another project car that was already a manual trans?

Thanks guys
Old 07-07-2014 | 08:46 AM
  #2  
Blackpanther99's Avatar
TECH Senior Member

iTrader: (8)
 
Joined: Sep 2012
Posts: 6,963
Likes: 4
From: Baytown, TX
Default

With a lil work it should be hard at all.
Old 07-07-2014 | 09:27 AM
  #3  
redbird555's Avatar
TECH Veteran

iTrader: (14)
 
Joined: Mar 2009
Posts: 4,444
Likes: 9
From: Pompano Beach FL
Default

all fbodys came with the provisions to be a manual even in 71. Just find the instructions to put a t56 in your car and follow that. obviously the floor will need to be cut put the process really isnt hard




All times are GMT -5. The time now is 12:28 AM.