Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Where to get a 700hp+ t56

Thread Tools
 
Search this Thread
 
Old 01-18-2017 | 09:24 AM
  #1  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default Where to get a 700hp+ t56

Hi all, im doing a 1978 trans am restoration/ pro touring car. Its getting a forged 5.3 along with a pair of 62s. I need a manual tranny because it will be a daily driver. Where can i buy a 700+hp rated t56 with out giving a core back? Car will weigh around 34-3600 lbs. Havent chose rear wheel size. Will most likley be a 19 or 20 inch wheel. Thanks
Old 01-18-2017 | 09:38 AM
  #2  
Senna's Avatar
On The Tree
iTrader: (1)
 
Joined: Nov 2016
Posts: 166
Likes: 2
From: San Jose CA
Default

A new T56 Magnum is rated at 700 foot lbs of torque and no core required.
Old 01-18-2017 | 09:42 AM
  #3  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Oops forgot to mention,
i believe the swap kit was designed for fbody styled t56s, any options for those?
Old 01-18-2017 | 10:20 AM
  #4  
necrocannibal's Avatar
10 Second Club
iTrader: (5)
 
Joined: Jan 2003
Posts: 1,500
Likes: 13
From: Memphis,TN
Default

Someone on here is running a stock T56 Magnum at over 1200 or so hp and doing long pulls and it is holding up fine.
Old 01-18-2017 | 11:38 AM
  #5  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Can a magnum take place of a f body t56 withought modifications?
Old 01-18-2017 | 11:57 AM
  #6  
Senna's Avatar
On The Tree
iTrader: (1)
 
Joined: Nov 2016
Posts: 166
Likes: 2
From: San Jose CA
Default

Originally Posted by moekluse
Can a magnum take place of a f body t56 withought modifications?
The only difference is shifter location,the magnum shifter is slightly further forward.
Old 01-18-2017 | 12:07 PM
  #7  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Not sure that will work with my application, shifter is already far enough
Old 01-18-2017 | 05:31 PM
  #8  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Anywhere i can buy a fbody t56 thatll handle 700hp, even from a vender on here? Rpm only quotes prices with return of a core charge, i dont have a core so i need a new one
Old 01-18-2017 | 10:26 PM
  #9  
Darth_V8r's Avatar
Moderator
iTrader: (4)
 
Joined: Jul 2014
Posts: 10,452
Likes: 1,854
From: My own internal universe
Default

Originally Posted by moekluse
Anywhere i can buy a fbody t56 thatll handle 700hp, even from a vender on here? Rpm only quotes prices with return of a core charge, i dont have a core so i need a new one
Add 1200
Old 01-18-2017 | 11:29 PM
  #10  
Senna's Avatar
On The Tree
iTrader: (1)
 
Joined: Nov 2016
Posts: 166
Likes: 2
From: San Jose CA
Default

Originally Posted by moekluse
Not sure that will work with my application, shifter is already far enough
I'm not following?

The F body T56 shifter is the furthest back of the two, Maybe 6". I would think the Magnum would be closer to the original, no?
Old 01-19-2017 | 05:40 AM
  #11  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Brp hot rods said ill need a new tail housing with a magnum. Abd i must of read thevpost wribg, i thought it said the magnum was shorter
Old 01-19-2017 | 11:24 AM
  #12  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

How much can a stock f body t56 handel?
Old 01-19-2017 | 12:52 PM
  #13  
Rise of the Phoenix's Avatar
TECH Senior Member
iTrader: (27)
 
Joined: Dec 2009
Posts: 9,728
Likes: 10
From: Jefferson City, MO
Default

Originally Posted by moekluse
How much can a stock f body t56 handel?
More than you think it will.
Old 01-19-2017 | 12:56 PM
  #14  
Tuskyz28's Avatar
TECH Veteran
10 Year Member
 
Joined: Sep 2014
Posts: 4,814
Likes: 614
From: Mississippi
Default

Originally Posted by moekluse
Anywhere i can buy a fbody t56 thatll handle 700hp, even from a vender on here? Rpm only quotes prices with return of a core charge, i dont have a core so i need a new one
RPM transmissions
Old 01-19-2017 | 03:44 PM
  #15  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Originally Posted by Rise of the Phoenix
More than you think it will.
do you think it will handle 600hp reliably? Im thinking of grabbing a tr6060 and replacing the tail housing
Old 01-19-2017 | 06:32 PM
  #16  
weedburner's Avatar
TECH Apprentice
5 Year Member
 
Joined: Oct 2015
Posts: 343
Likes: 13
Default

Originally Posted by moekluse
do you think it will handle 600hp reliably? Im thinking of grabbing a tr6060 and replacing the tail housing
A properly set-up T56 can easily handle 600hp, just make sure the clutch's capacity is in the 550-650 ft/lb range.
Old 01-19-2017 | 09:03 PM
  #17  
Project GatTagO's Avatar
TECH Senior Member
20 Year Member
iTrader: (7)
 
Joined: Mar 2003
Posts: 10,244
Likes: 1,531
From: The City of Fountains
Default

OP....dude...get a T56 magnum and a new driveshaft. Stop with the nonsense...

Andrew
Old 01-19-2017 | 09:35 PM
  #18  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Originally Posted by Project GatTagO
OP....dude...get a T56 magnum and a new driveshaft. Stop with the nonsense...

Andrew
what's the difference between a magnum and a tr6060 if there is any? I'm thinking of going with a magnum.
Old 01-19-2017 | 10:03 PM
  #19  
gnx7's Avatar
TECH Junkie
20 Year Member
iTrader: (28)
 
Joined: Nov 2002
Posts: 3,522
Likes: 192
From: San Francisco, CA
Default

I run a 100% stock Magnum making well over 1200 flywheel HP and no issues. I don't launch it hard (yet); however I do run 1/2 mile events and make big power in 4th and 5th gear without problems shifting at 7800rpm. No manual transmission will last forever making big power but it sure is fun banging gears

At 14psi it made 1060rwhp... we run 20-22psi in 4th/5th doing 1/2 mile events. No idea what it makes at that level... but it is more than the tires can handle since it blows the tires off at 180mph shifting into 5th if you want it to!

Old 01-20-2017 | 05:33 AM
  #20  
moekluse's Avatar
Thread Starter
TECH Enthusiast
iTrader: (2)
 
Joined: Nov 2015
Posts: 543
Likes: 3
From: Nc
Default

Originally Posted by gnx7
I run a 100% stock Magnum making well over 1200 flywheel HP and no issues. I don't launch it hard (yet); however I do run 1/2 mile events and make big power in 4th and 5th gear without problems shifting at 7800rpm. No manual transmission will last forever making big power but it sure is fun banging gears

At 14psi it made 1060rwhp... we run 20-22psi in 4th/5th doing 1/2 mile events. No idea what it makes at that level... but it is more than the tires can handle since it blows the tires off at 180mph shifting into 5th if you want it to!

https://www.youtube.com/watch?v=y472n4EbWO0
Wow nice car. Looks like I need to grab a magnum



Quick Reply: Where to get a 700hp+ t56



All times are GMT -5. The time now is 03:41 PM.