Tremec t160
#1
Teching In
Thread Starter
Join Date: Jan 2018
Location: Lexington NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Tremec t160
Can you use a TREMEC T160 with a 5.3 LS and if so what is needed to connect the to. I am want to replace my 250 with the 5.3 LS and keep my three speed if at all possibly. Any info would be a great help thank in advance to all or any that could help..
#2
TECH Addict
iTrader: (4)
You can. The 250 is set up like a 68-85 SBC V8 for bell housing, starter, and flywheel.
Read through this, keeping in mind it is possible to have a disc to flywheel size mismatch that can be avoided.
https://ls1tech.com/forums/conversio...ko-ls-motor.ht
Read through this, keeping in mind it is possible to have a disc to flywheel size mismatch that can be avoided.
https://ls1tech.com/forums/conversio...ko-ls-motor.ht