Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Grinding when at complete stop?

Thread Tools
 
Search this Thread
 
Old 12-10-2018, 08:32 PM
  #1  
Teching In
Thread Starter
 
Austintransam's Avatar
 
Join Date: Dec 2018
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Grinding when at complete stop?

I’m thinking about buying a 1999 Pontiac trans am 6speed and for some reason gears only grind at a stop with clutch fully depressed down?
if I wait a split second then put it in a gear it will not grind? I have only tried 1st and 2nd gear. Both grind. tried searching in a few different forums for this problem and can’t seem to figure out what it is and nobody has any info on it? Please help? One mechanic I talked to said synchros are toast But if they was wouldn’t they always grind or? Help please?


Last edited by Austintransam; 12-10-2018 at 08:46 PM.
Old 12-12-2018, 09:08 AM
  #2  
Moderator
iTrader: (4)
 
Darth_V8r's Avatar
 
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes on 1,145 Posts
Default

Sounds like clutch needs to be bled
Old 12-12-2018, 01:42 PM
  #3  
TECH Enthusiast
iTrader: (5)
 
2ToeRacing's Avatar
 
Join Date: Aug 2010
Location: Atlanta Ga,
Posts: 580
Received 17 Likes on 16 Posts

Default

could be the trans fluid is wrong, not letting the gears stop spinning
Old 12-14-2018, 03:19 PM
  #4  
9 Second Club
 
stevieturbo's Avatar
 
Join Date: Nov 2003
Location: Norn Iron
Posts: 13,616
Received 179 Likes on 154 Posts

Default

Clutch problem, dragging, may need bled, may need replaced, may have other issues.

Very unlikely to, be the oil, unless there is some really shitty oil in there, or none at all.




All times are GMT -5. The time now is 09:57 AM.