Hi all, first post on here but I’m needing some help diagnosing an issue before I start buying parts. Everything was normal until pulling onto my street last night the clutch pedal went to the floor. Pulled it up with my foot as I’ve read about this issue before (master cylinder) and after I pulled it up it is now stuck in the “up” position. It has about an half inch of travel then stops hard. Not sure if this is a MC issue or something internal such as the slave or throw out or clutch itself. Any help would be appreciated. Thanks

 

Have you tried YouTube?

 

Yes and haven’t found anything on why the clutch won’t depress now

 

If your clutch line popped out of the slave cyl it would do that. Gonna have to climb underneath and see if it's loose.