Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Can my clutch be adjusted?

Thread Tools
 
Search this Thread
 
Old 08-04-2004, 02:57 PM
  #1  
Launching!
Thread Starter
 
IRVINEWS6's Avatar
 
Join Date: Jan 2003
Location: IRVINE,CA
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts

Default Can my clutch be adjusted?

I had a Spec III clutch and adjustable master installed a while back. Ever since then, everyone who drives my car says that the clutch doesn't engage until the clutch pedal is almost all the way released. Is there a way to make the clutch engage sooner, like right off the floor?
Old 08-04-2004, 03:40 PM
  #2  
On The Tree
 
m_donze's Avatar
 
Join Date: Feb 2003
Location: Birmingham, AL
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by IRVINEWS6
I had a Spec III clutch and adjustable master installed a while back. Ever since then, everyone who drives my car says that the clutch doesn't engage until the clutch pedal is almost all the way released. Is there a way to make the clutch engage sooner, like right off the floor?
yes there is but sorry i don't know how...i wouldn't make the engage point right off the floor because you'll wear out a clutch very fast that way. Sorry about the lack of information
Old 08-04-2004, 03:46 PM
  #3  
TECH Fanatic
iTrader: (2)
 
MyLS1Hauls's Avatar
 
Join Date: Nov 2001
Location: Michigan
Posts: 1,153
Likes: 0
Received 0 Likes on 0 Posts

Default

You'd have to remove the shim between the slave and the transmission.




All times are GMT -5. The time now is 01:01 PM.