how to make master clyinder adjustable???

Reply Subscribe

Thread Tools

Search this Thread

Sep 5, 2004 | 11:10 PM

tomss99

Thread Starter

Launching!

Joined: Apr 2004

Posts: 230

Likes: 0

From: south jersey

how to make master clyinder adjustable???

i know its in here somewhere but i cant find it no matter what i search.... i got a ram clutch kit going in my car since the 4 month old spec stage three just took a dump on me..... i gotta call those guys up and see if they can give me something for this..... i broke it in properly and all.... but anyway please if someone knows a link or anything on how to make the master cylinder adjustable post it haha..... or if you know where i can buy one for decently cheap.... mcleods is going for 310 bucs which is just crazy for me...

Sep 6, 2004 | 12:57 AM

TripleBlackRamAirT/A

Launching!

iTrader: (3)

Joined: Dec 2001

Posts: 231

Likes: 0

From: Horsham PA

Quote:

Originally Posted by tomss99

Im in the same boat as you! My spec 3i went out on me after just under 5,000mi. It screwed my new billet flywheel up too. Now I put the ram 910 in my car and I cant get it to disengage

. I tried making my own adjustable master and it still won't work right. ******* piece of **** spec clutch!

Sep 6, 2004 | 03:33 AM

DaveSchott

TECH Enthusiast

iTrader: (5)

Joined: Nov 2001

Posts: 582

Likes: 0

From: OH

https://ls1tech.com/forums/showthrea...ustable+master

Sep 6, 2004 | 09:33 AM

tomss99

Thread Starter

Launching!

Joined: Apr 2004

Posts: 230

Likes: 0

From: south jersey

yeah dude!!!! **** spec!!! **** why didnt making your own master work.... this is so frustrating!!

Sep 6, 2004 | 10:15 AM

tomss99

Thread Starter

Launching!

Joined: Apr 2004

Posts: 230

Likes: 0

From: south jersey

the ram adjustable master is just a stock unit made ajustable already for you.... i finally found it for 166 and some change....which still sucks since im a broke *** college kid

Sep 6, 2004 | 01:21 PM

tomss99

Thread Starter

Launching!

Joined: Apr 2004

Posts: 230

Likes: 0

From: south jersey

does anyone know where you get the ball end to make this??? does anyone have pictures

Sep 6, 2004 | 01:27 PM

Tally TransAm

TECH Junkie

iTrader: (17)

Joined: Nov 2001

Posts: 3,406

Likes: 2

From: Tallahassee, Fl

i did a write up with pics a while back, lemme see what i can dig up

Trending Topics

Disappointing Dyno Results

33

561
So GM / ACD is no longer an option for Oil Pressure Sending Units?

14

350
Oil Bypass Barbell

20

512
Help between two cams

8

276
Radiator Fitment

6

195

Sep 7, 2004 | 11:55 AM

5 Liter Eater

TECH Enthusiast

iTrader: (5)

Joined: Feb 2004

Posts: 520

Likes: 0

From: Pearland, TX

Quote:

Originally Posted by tomss99

does anyone know where you get the ball end to make this??? does anyone have pictures

I got my parts from McMaster Carr. Here's the parts I used:

1 90494A231 Grade 2 Plain Steel Hex Thin (jam) Nut, 3/8"-24 Screw Size, 9/16" Width, 7/32" Height 1 Pack

2 2573A33 Hex Rethreading Die, Right Hand, 3/8"-24 Nf, 25/32" Width Across Flats 1 Each

3 6072K175 Zinc-Plated Steel Ball Joint Rod End, 3/8"-24 Right Hand Female Shank, 3950 Lb Load Cap 1 Each