Weird Slave Problems
10-14-2004, 03:13 AM
#1
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Memphis,TN
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Weird Slave Problems A Couple of weeks ago I ran at the track here, a few days later my "clutch" started slipping. Well I figured out that its whenever I shift, When I give it gas the car shoots up 300-600 rpm and then grabs. But If I don't shift again, just stay in gear and do it again its fine! 
When I shift again, it does it again. 
Anyone else have this prob.? BTW I bleed the clutch tonight and it didn't help.
I've been leaking fluid out somewhere and I've used 1 can of Fluid in the past 2 weeks. Well I figured it was b/c I forgot to put the Stainless braided line's (slave line) heat shield back on...I was sitting in the drive through the other day and started letting the pedal out slowly and I though I heard a pppssss sound like fluid was shooting out at a certain pedal point but wasn't sure.
Anyone have any clues...?
BTW Its the stock 02,Slave/MC and SPEC Stg. 3 Clutch.
When I shift again, it does it again. Anyone else have this prob.? BTW I bleed the clutch tonight and it didn't help.
I've been leaking fluid out somewhere and I've used 1 can of Fluid in the past 2 weeks. Well I figured it was b/c I forgot to put the Stainless braided line's (slave line) heat shield back on...I was sitting in the drive through the other day and started letting the pedal out slowly and I though I heard a pppssss sound like fluid was shooting out at a certain pedal point but wasn't sure.
Anyone have any clues...?
BTW Its the stock 02,Slave/MC and SPEC Stg. 3 Clutch.
