Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Does McLeod make good clutches?

Thread Tools
 
Search this Thread
 
Old 12-22-2004 | 07:39 PM
  #1  
Boostaholic's Avatar
Thread Starter
TECH Addict
iTrader: (4)
 
Joined: Sep 2002
Posts: 2,542
Likes: 0
From: Boise, ID
Default Does McLeod make good clutches?

I'm looking at this setup here, and would like to know about how much power it will hold.

McLeod Street Twin Dual-Disk Clutch, Aluminum Flywheel & new master cylinder

I will also be putting in a new slave cylinder at the same time I do this swap.
Old 12-23-2004 | 05:29 AM
  #2  
LS1SS4ever's Avatar
TECH Resident
LS1Tech 20 Year Member
 
Joined: Jan 2004
Posts: 973
Likes: 0
Default

You can say it's the best choice on the market. My friend has one with him around 22k mile and happy with it.
Old 12-23-2004 | 08:43 AM
  #3  
Bugsquawsher's Avatar
TECH Regular
iTrader: (1)
 
Joined: Dec 2002
Posts: 467
Likes: 1
From: Lexington, Texas, USA
Default

I never had one, But I have installed a couple.
I did like the way they feel. Never raced with one.
The only thing I really don't like is that master they sell.
Unless they finally fixed the problem.
I have how ever seen the twin disk that blew all of its friction material off of one of its disks, and Mcleod try to say it was cause the guy was slipping the clutch instead of just dumping it.
and this was in just daily driving in traffic.
WTF are you suppose to smoke the tires every two feet in stop and go traffic????
They did fix it for free.
I really just posted here to get post number 400




All times are GMT -5. The time now is 10:22 PM.