Aluminum Flywheel
Thread Starter
Teching In
Joined: Mar 2005
Posts: 6
Likes: 0
Aluminum Flywheel I was wondering about the aluminum flywheel, I just had A SPEC aluminum flywheel and Stage 2 clutch installed, will the aluminum flywheel yield more horsepower to the rear wheels, and if so, how much?
TECH Junkie
Joined: Mar 2002
Posts: 3,019
Likes: 0
From: memphis tn
Aluminum flywheel removes rotating weight,so you do make more hp.The only downside is that the flywheel provides inertia to help with idle quality and ease takeoffs at lower revs,but you get used to it.Also you will notice the motor will revs faster and it will deccelarate faster too.
Originally Posted by XTINCT
How much would a new cam and installation run? I'm fairly new to this if you haven't noticed, i have a 98 t/a with 60,000mi only mods are loudmouth,subframe connectors,
You'll want headers before a cam. When you get headers you will want a different cat-back because the Loudmouth sounds like crap with headers. Then an LS6 intake. After those, you will have the foundation to support a Cam
. 
