Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Spec SIII w/6 puck disc lasts only 6500 miles.

Thread Tools
 
Search this Thread
 
Old 04-11-2005 | 05:16 PM
  #1  
Scalpel's Avatar
Thread Starter
TECH Senior Member
iTrader: (4)
 
Joined: Nov 2001
Posts: 7,000
Likes: 1
From: Lexington, Ky
Default Spec SIII w/6 puck disc lasts only 6500 miles.

The disc is worn past spec. It had 1 drag strip pass and 15 street runs on it.

It came out of an '00 WS6 w/410 RWHP N/A, never saw any spray.

That's pretty lack luster, IMO.

PS, the new thickness of this disc is 0.310", min that Spec said they'd run it at was 0.290" which is what this one spec'd out at.

PP is still in great shape, though.
Old 04-11-2005 | 08:40 PM
  #2  
LS1x2's Avatar
Formerly 4mulaJoe
iTrader: (11)
 
Joined: Nov 2001
Posts: 2,763
Likes: 0
From: hou
Default

Do you have a huge cam with high gears to where you have to slip the clutch alot to get going?
Old 04-11-2005 | 09:20 PM
  #3  
Krab's Avatar
TECH Addict
iTrader: (28)
 
Joined: Sep 2002
Posts: 2,170
Likes: 0
From: Central Texas
Default

I haven't visually inspected mine since I installed it, but my spec 3 seems to be holding up pretty well. It does only have one complete run down the 1/4 though and its fair share of WOT runs on the street. It was installed about 6K miles ago also. No complaints yet...
Old 04-11-2005 | 11:59 PM
  #4  
2000 ws6's Avatar
TECH Enthusiast
iTrader: (10)
 
Joined: Nov 2001
Posts: 652
Likes: 0
From: Ky
Default

It came out of my car. I have a g5x2 and 4.10's and I didn't have to give it any gas ever to get going.




All times are GMT -5. The time now is 06:01 AM.