Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Throw out bearing??

Thread Tools
 
Search this Thread
 
Old 05-22-2005 | 03:07 AM
  #1  
White 02 WS6's Avatar
Thread Starter
TECH Regular
 
Joined: Feb 2002
Posts: 444
Likes: 0
From: Tomball
Default Throw out bearing??

I have just picked up a new slave and it seems the whole plastic retainer piece and spring keep poping off the shaft...I picked it up eariler and the thing came off...Is this defective?? It just seems like the plastic piece might be worn some and its comming off with no effort at all...
Old 05-22-2005 | 08:42 AM
  #2  
HartAttack's Avatar
TECH Enthusiast

iTrader: (8)
 
Joined: Aug 2004
Posts: 718
Likes: 0
From: Las Vegas
Default

yeah thats your TOB.....it shouldnt come off like that..
Old 05-22-2005 | 10:33 AM
  #3  
Squintz Palladoris's Avatar
11 Second Club
iTrader: (1)
 
Joined: Sep 2003
Posts: 1,252
Likes: 0
From: Fayettenam, North Cakalki
Default

Make sure its snapped in all the way.
If it is broken jujst pull the one off your old slave and re use it. Its easy to put the new bearing on there.

Brad
Old 05-22-2005 | 10:52 AM
  #4  
MIGHTYMOUSE's Avatar
TECH Senior Member
iTrader: (59)
 
Joined: Nov 2001
Posts: 10,010
Likes: 46
From: Virginia
Default

the plastic base is cracked.. take it back.
Old 05-22-2005 | 09:35 PM
  #5  
White 02 WS6's Avatar
Thread Starter
TECH Regular
 
Joined: Feb 2002
Posts: 444
Likes: 0
From: Tomball
Default

Thats what i was thinking mightymouse, i took the tranny out of my car today and tried to pop the black cap on the slave thats still in the car and it wouldnt budge so its going back tomorrow....




All times are GMT -5. The time now is 05:26 AM.