LukePhillips

iTrader: (2)

Going down Hwy K earlier, I put it in 3rd and it popped out. (It does this once every day or two. syncho is done for, it pulls out way to easy) It came out while I was letting out the clutch. Big grind. Go to put in again and it wont go in, wont go in any gear. Pull into a plaza, still wont go in any gear. Turn it off, shifts fine. Turn it back on, goes in with alot of effort. Wait a few minutes, and its back to normal. Drove it home like a normally do and it was fine.


What happened? Should I start saving my pennies?

99ZEOD

iTrader: (5)

Be careful, it might just leave you stranded. Go ahead and get it rebuilt now. Mine did the same thing and I barely got it home.

tippmann243

try a fluid change first, if that dont fix it then you need a rebuild

thesource

iTrader: (60)

Typical 3-4 shift fork issue and it probably

LukePhillips

iTrader: (2)

Any other opinions? Previous owner said he changed the tranny oil 10,000ish miles ago, so Im looking at a synchro or bent fork?

ss rally red

iTrader: (8)

Most likely