Tranny Problems
Thread Starter
Teching In
Joined: Sep 2005
Posts: 2
Likes: 0
Tranny Problems Hello everyone. Im new to the forum and this is my first thread. But i recently traded my mustang gt for a 2000 WS6 T/A. Its a six speed. And i been having a few problems with the shifting. I already installed a new master cylinder. That helped a little,, but still not completly fixed i dont think. At low rpms i can shift threw every gear as fast as i want, But as soon as i tromp down on it,, shift performance becomes very poor. It makes a roar when goin into second and complety pops itself out of fourth. What u guys think?
Sounds like this one saw another punisher before you. Jumpout fo 3rd or 4th is common with the stock 3/4 shift fork. Hard shift at high RPM is common for non drill mod cars. Both topics are searchable.
Teching In
Joined: Sep 2005
Posts: 18
Likes: 0
i rebuild this transmissions cheap. i use steel fork and synchronizers from d&d performance. i charge $175 labor plus parts and shipping.
email me at des435race@hotmail.com or 3046334991
forks are like 29 and 79 and synchronizers are 149 each
email me at des435race@hotmail.com or 3046334991
forks are like 29 and 79 and synchronizers are 149 each
