Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

clutch line wont plug in

Thread Tools
 
Search this Thread
 
Old 10-18-2005 | 09:45 AM
  #1  
ss01layinwheel's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2004
Posts: 194
Likes: 0
From: flemington, NJ
Default clutch line wont plug in

I am in the process of putting my car back together after a motor rebuild. I got the trans in, but the damn clutch line wont plug into the slave. its like there is something jammed in there keeping it from locking in(there is nother in there, i checked). any thoughts?
Old 10-18-2005 | 11:55 AM
  #2  
rush7's Avatar
Launching!
iTrader: (2)
 
Joined: Jan 2005
Posts: 246
Likes: 0
From: Eskridge, KS
Default

Originally Posted by ss01layinwheel
I am in the process of putting my car back together after a motor rebuild. I got the trans in, but the damn clutch line wont plug into the slave. its like there is something jammed in there keeping it from locking in(there is nother in there, i checked). any thoughts?
do you have the bleeder open? makes it so much easier....but even then it is still a bitch to get in
Old 10-18-2005 | 12:26 PM
  #3  
383LQ4SS's Avatar
TECH Veteran
iTrader: (33)
 
Joined: Nov 2001
Posts: 4,266
Likes: 0
From: Port Richey
Default

yeah...just crack open the bleeder and it should snap right in.




All times are GMT -5. The time now is 07:50 AM.