GIGAPUNK

iTrader: (2)

DOES ANY BODY KNOW IF SUCH A THING EVEN EXISTS?

I WROTE JOE AT T56 REBUILDS AND HE THOUGHT FIDANZA MIGHT.


I LOOKED UP FIDANZA and they don't list weight or a steel flywheel

Corvette 05- 6.0L 198171 AL weight TBA 221171


And Spec Al at LM

Part No.: SC57A Price: $439.95


Both of these are labeled as LS2 flywheels, but I'm just presuming that any 05+ corvette flywheel will work just fine with a LS7 clutch and pressure plate.

I'm looking for a lightweight flywheel to go with a LS7 clutch and pressure plate. Ideally I would like the lightest billet steel design that I can find, Aluminum never sat well with me. And the 50+lbs stock flywheel just isn't acceptable.

Any body have any ideas?

SOMSS

iTrader: (1)

You must use a LS2 flywheel with the LS7 clutch. The design is different than that of the LS1 type flywheel.

BrandonDrecksage

iTrader: (1)

the ls7 flywheel is the stock ls2 flywheel...there the same. so an after market ls2 flywheel should mate up to the ls7 clutch.

Aster

iTrader: (9)

Fidanza does make an aluminum flywheel for the LS2. The part # is 198171