LS6 Master Cylinder? PIC

Reply Subscribe

Thread Tools

Search this Thread

Jun 19, 2006 | 09:59 PM

jinxedz

Thread Starter

12 Second Club

iTrader: (5)

Joined: Jun 2004

Posts: 509

Likes: 0

From: Toronto

LS6 Master Cylinder? *PIC*

Is this the LS6 master cylinder for the F-Body?

I ordered this and the slave cylinder from Fred Beans, and the slave appears to be from a 'vette ...

Jun 19, 2006 | 10:19 PM

RPO_Z06

Launching!

iTrader: (11)

Joined: Aug 2005

Posts: 209

Likes: 0

From: Norman, Oklahoma

That looks like the one I installed on my wifes '00 Corvette.

Jun 19, 2006 | 10:19 PM

Deech

PR Director

iTrader: (8)

Joined: Nov 2001

Posts: 5,913

Likes: 0

From: Pasadena, Tx

I ordered a master for a fbody from Fred Beans as well and it doesn't look like that so I am assuming its for a vette. Is that what you wanted to order?

Jun 19, 2006 | 10:23 PM

jinxedz

Thread Starter

12 Second Club

iTrader: (5)

Joined: Jun 2004

Posts: 509

Likes: 0

From: Toronto

I ordered 01-02 f-body hydrolics for my LS7 clutch install ... I was sent this and what appears to be a vette' slave cylinder as well ...

Here are pics of the slave on the car

Went on just fine ... works just fine ... but as you can see, it isnt the right part.

Jun 20, 2006 | 03:15 PM

jinxedz

Thread Starter

12 Second Club

iTrader: (5)

Joined: Jun 2004

Posts: 509

Likes: 0

From: Toronto

ttt

just wanna see if my slave is supposed to look like this ...

Jun 21, 2006 | 03:33 PM

gun5l1ng3r

TECH Fanatic

Joined: Mar 2004

Posts: 1,017

Likes: 0

From: Laguna Niguel, CA

Uh, no the green connector is supposed to be in the bellhousing with it almost sticking out the side. Both of your parts are for the Corvette. There is no hose on the Fbody slave cylinder, only the green connector which is directly connected to the slave body on the Fbody part.

Sorry if this doesn't make sense.