Ok
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2005
Posts: 2,451
Likes: 0
From: Pasadena, CA
Ok No ifs, ands, or Buts
I am getting the LS7 pressure plate and clutch tomorrow. ( I Already have the LS2 Aluminum flywheel by FIndanza I got for $343 total)
I just need 2 things:
1) Excluding Ebay, what is the cheapest place I can get the LS7 clutch and pressure plate?
2) and what else am I going to need with this? ( I dont need the flywheel!)
Pilot bearing?
is that all?
I am getting the LS7 pressure plate and clutch tomorrow. ( I Already have the LS2 Aluminum flywheel by FIndanza I got for $343 total)
I just need 2 things:
1) Excluding Ebay, what is the cheapest place I can get the LS7 clutch and pressure plate?
2) and what else am I going to need with this? ( I dont need the flywheel!)
Pilot bearing?
is that all?
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2005
Posts: 2,451
Likes: 0
From: Pasadena, CA
Originally Posted by Rescue Ranger
No offense mate but search around a bit. This question has been answered literally hundreds of times.
I didnt find a place where they are cheapest. Bynspeed is the cheapest I saw, but if anyone knows of a cheaper site, it would help.
KThxBye
Cheapest I have seen is from fredbeansparts.com for just under $490, but that is INCLUDING the LS2 flywheel. Maybe you can ask them how much they charge for just the pp and disk?
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2005
Posts: 2,451
Likes: 0
From: Pasadena, CA
Originally Posted by Turo
Cheapest I have seen is from fredbeansparts.com for just under $490, but that is INCLUDING the LS2 flywheel. Maybe you can ask them how much they charge for just the pp and disk?
Trending Topics
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2005
Posts: 2,451
Likes: 0
From: Pasadena, CA
Ok since I PM like a 1000 people and didnt get any " up to my standard responses"
Here is what I bought:
LS7 clutch and pressure plate
GM pilot bearing
GM clutch slave cylinder / actuator
I hope that is all I need for the clutch:
As for other items I bought a B&M short shifter ( im assuming its the ripper shifter) and I bought Spohn adjustable lower control arms with polyeurythane bushings ( red and chrome moly option)
All this ( excluding the LS2 Aluminum flywheel for $855 ( before shipping costs)
Here is what I bought:
LS7 clutch and pressure plate
GM pilot bearing
GM clutch slave cylinder / actuator
I hope that is all I need for the clutch:
As for other items I bought a B&M short shifter ( im assuming its the ripper shifter) and I bought Spohn adjustable lower control arms with polyeurythane bushings ( red and chrome moly option)
All this ( excluding the LS2 Aluminum flywheel for $855 ( before shipping costs)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
