RAM 910 disk & aluminum flywheel....
#3
Re: RAM 910 disk & aluminum flywheel....
Make SURE the friction surface of the flywheel is surface ground before installing. There is a flyhweel manufacturer out there who installs their inserts without grinding and the disc will NOT seat against this surface.
#4
Re: RAM 910 disk & aluminum flywheel....
So these aluminum flywheels basically have a steel "insert"?
stick only - which manufacturer are you talking about, and which one would you recommend.
Gette...what flywheel you have, how long has it been installed (miles), etc... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ June 18, 2002, 04:38 PM: Message edited by: TAMUz06 ]</small>
stick only - which manufacturer are you talking about, and which one would you recommend.
Gette...what flywheel you have, how long has it been installed (miles), etc... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ June 18, 2002, 04:38 PM: Message edited by: TAMUz06 ]</small>
#6
Re: RAM 910 disk & aluminum flywheel....
It works, and I have an aluminum flywheel for sale too <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Let me know if you are interested Jim.
ngette@smith.com
<small>[ June 18, 2002, 12:20 PM: Message edited by: TrahnZam WS6 ]</small>
ngette@smith.com
<small>[ June 18, 2002, 12:20 PM: Message edited by: TrahnZam WS6 ]</small>