just pulled my t56 out as much as rebuilds cost makes me want to do it myself, i am somewhat capable with this stuff but have never opened up a tranny, whats it like?? any pics?? or has anyone done it? help would be great?
already have the rebuild instructions printed off t56 rebuilds but its hard for me to tell just by looking at those

 

You might have to have a custom 5/6 Driven Gear puller. Hard to tell until you see if it is pressed on. You will need a 15mm socket, snap ring pliers, 40t torx bit, grease and a press.

Thanks,
Amber
T56Rebuilds.com

 

dont have the press, realy wish i could have you guys do it, i know your the best just cant afford with shipping and all thanks though

 

I did mine a coupe of years ago. I have some pics and good links to instructions. Check it out.

T56 rebuild