Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

My clutch stuck

Thread Tools
 
Search this Thread
 
Old 10-24-2006, 10:38 PM
  #1  
Teching In
Thread Starter
 
FireFalcon's Avatar
 
Join Date: Oct 2005
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Question My clutch stuck

My clutch doesn't want to come back up on it's own sometime.
I have to reach down and pull it back up when it does it.
It's less than a year old. Luks Pro Gold or somethin like that... It's made by the same people who make the sock clutch it's just a "high peformance" version.

What could it be
Old 10-24-2006, 11:30 PM
  #2  
TECH Fanatic
iTrader: (5)
 
chadtx01's Avatar
 
Join Date: Nov 2005
Location: Sweeny Texas
Posts: 1,701
Likes: 0
Received 0 Likes on 0 Posts
Default

search is your friend.

Look into the drill mod and your hydrolics.
Old 10-25-2006, 01:14 AM
  #3  
TECH Fanatic
iTrader: (17)
 
ChaseSS's Avatar
 
Join Date: Jun 2004
Location: St. Louis
Posts: 1,373
Likes: 0
Received 0 Likes on 0 Posts

Default

your heating your fluid too much causing it to boil so air gets in the hydralics which causes the pedal to stick to the floor...I would imagine you have a 98-00? 01-02's have better systems but do a search and you will find more answers
Old 10-25-2006, 04:44 AM
  #4  
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
orangeapeel's Avatar
 
Join Date: Nov 2004
Location: Justin, TX
Posts: 16,083
Likes: 0
Received 4 Likes on 4 Posts

Default

I think that you are suffering from a bad slave cylinder most likely. It might just need a good gravity bleeding.
Old 10-25-2006, 04:46 AM
  #5  
Launching!
iTrader: (2)
 
ez98ls1's Avatar
 
Join Date: Feb 2004
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts

Default

I have a 98 and upgraded all the hydralic parts when my new clutch was installed 7000 miles ago. I am on my 3rd slave since the install and am about to get a new master. When i press the pedal a little I can feel a vibration, and the pedal sticks from time to time. I am starting to think about selling the textralia I have and putting a LS6 or LS7 in. I had no problems like this before the new clutch.
Old 10-25-2006, 04:57 AM
  #6  
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
orangeapeel's Avatar
 
Join Date: Nov 2004
Location: Justin, TX
Posts: 16,083
Likes: 0
Received 4 Likes on 4 Posts

Default

I hear good things about the LS7.




All times are GMT -5. The time now is 09:41 AM.