Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Need help with choosing a clutch

Thread Tools
 
Search this Thread
 
Old 11-05-2006, 05:19 PM
  #1  
Teching In
Thread Starter
 
T/A_BlackDragon's Avatar
 
Join Date: Jun 2006
Location: Wichita
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Need help with choosing a clutch

Hey my stock clutch is finally going out on my 2000 TA and i was wondering what kind of clutch to go with i was looking at a Spec 2+ but i dont know. Right now my engine is stock but i plan on upgrading to a Procharger within a year hopefully. What kind of clutch should i go with and where should i go for it.
Old 11-06-2006, 08:53 AM
  #2  
Teching In
Thread Starter
 
T/A_BlackDragon's Avatar
 
Join Date: Jun 2006
Location: Wichita
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Does anyone have any help? I dont want to replace with a stock clutch so i was wondering if what i wanted to upgrade to was ok or not.
Old 11-06-2006, 08:54 AM
  #3  
TECH Enthusiast
iTrader: (5)
 
pewter 01 SS's Avatar
 
Join Date: Jul 2004
Location: cali
Posts: 610
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by T/A_BlackDragon
Does anyone have any help? I dont want to replace with a stock clutch so i was wondering if what i wanted to upgrade to was ok or not.

go to the transmission section further down, you'll find the info you need
Old 11-06-2006, 08:56 AM
  #4  
TECH Enthusiast
iTrader: (12)
 
2000TransAmWS6's Avatar
 
Join Date: Sep 2004
Location: Danville, VA
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts
Default

do a search in the "Manual Transmission" section

https://ls1tech.com/forums/forumdisplay.php?f=14
Old 11-06-2006, 08:59 AM
  #5  
Staging Lane
 
gen3toy's Avatar
 
Join Date: Feb 2006
Location: west aust,australia
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default

if its for m6/t 56 then get a z grip texstralia
Old 11-06-2006, 09:05 AM
  #6  
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
orangeapeel's Avatar
 
Join Date: Nov 2004
Location: Justin, TX
Posts: 16,083
Likes: 0
Received 4 Likes on 4 Posts

Default

I will move this for you.
Old 11-06-2006, 09:06 AM
  #7  
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
orangeapeel's Avatar
 
Join Date: Nov 2004
Location: Justin, TX
Posts: 16,083
Likes: 0
Received 4 Likes on 4 Posts

Default

Ram Powergrip HD gets my vote. They are rated for nitrous, so I figured that it can take a procharger's heat on a conservative boost level.
Old 11-06-2006, 11:52 AM
  #8  
TECH Enthusiast
iTrader: (7)
 
MonkeyBoneSS's Avatar
 
Join Date: Mar 2006
Location: Louisiana
Posts: 559
Likes: 0
Received 0 Likes on 0 Posts
Default

I am very interested in this thread. I'm in the same boat and will also be going F.I. within the year and in the market for a clutch right now ( and a tranny rebuild ). What would you guys recommend for around 600 rwhp.

Textrilla (single/ twin)?

What would be the advantages of going with a twin disk, of any type clutch?




All times are GMT -5. The time now is 05:11 PM.