01-02 hydraulics require drill mod too, right?
#5
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ripper415
actually with my 02 ss i never noticed any of the clutch sticking problems while racing that people have described which lead to doing the drill mod.
#6
well, never had that happen with dads 2002 TA either, thats kinda why I wondered. but his car didnt have much power before this springs. so we'll see with his cause Im not taking his apart till it has a problem. but as for the car I originally asked for is an 01, im goin to do that mod anyways now while I have his car and the trans is out getting rebuilt anyways. Ive done the drill mod before ,so I know what the restricter looks like. I'll let ya'll know if it looks diff. then the older lines do.
Trending Topics
#8
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
I've got an '02 with the stock set-up.
I'm very satisfied considering it's lasted through cam only.. then twin turbos at the track and abused on the street.
Now the turbos are off.. and if I stretch 3~4th gear the pedal will stay bottomed out. The clutch isn't slipping, it's just the pedal...
I guess I need to search for the write up.
Honestly, when it's time to swap clutches, I'm gonna put in another Zo6 unit.
I'm very satisfied considering it's lasted through cam only.. then twin turbos at the track and abused on the street.
Now the turbos are off.. and if I stretch 3~4th gear the pedal will stay bottomed out. The clutch isn't slipping, it's just the pedal...
I guess I need to search for the write up.
Honestly, when it's time to swap clutches, I'm gonna put in another Zo6 unit.
#11
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackScreaminMachine
Half the issues I read about center around the clutch fluid I bet its beat up and boiled. Swap it out, wrap the line, thats half the issue.
#12
Banned
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by brad8266
The write up is at www.installuniversity.com josh.
p.s- 'grats on the mod thing... they'll never make me a mod, I'm much too controversial.
#13
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ~JOSHUA
Thanks bro..
p.s- 'grats on the mod thing... they'll never make me a mod, I'm much too controversial.
p.s- 'grats on the mod thing... they'll never make me a mod, I'm much too controversial.
#14
just did the drill mod today on the 01ss and yep it has the restricter too. it does look diff then the LT1 line I did before. the oring in the installuniversity writeup is different. thats how the LT1 oring looked. the 01 hyd. line 0ring looks to be built into the mastercylinder. the hardest part of the whole drill mod is getting the F'n master cyl. bolted back to the firewall. takes two people.