Won't go into 3rd at high RPM?
#21
Drill mod is already done. Looks like time for a rebuild. Tried it on the street tonight and it went into 3rd with no problem @ 6000. I did shift slower than I do at the track.
#23
Originally Posted by BAGN
What size drill bit did you use?
Thanks
Thanks
i used an 1/8 inch drill bit.it shrinks down to almost a 1/16th inch hole deep down inside the fitting when you disconnect the line.look in the transmission faq sticky thread there is a write up on it in there.
#26
Dave when ever you are ready to pull the tranny let me know and I will come by and give you a hand. You definately need to get it rebuilt so you can get back to the track and get that 11 second run.