clutch master mod
Its called the drill mod and all you do is drill out the little restrictor that is in the braided line that runs from the master to the slave. It will help in clutch engagement especially when racing. It should be a first mod for everyone with a manual trans.
Pretty much you have to just pull the master cylinder out of the car and disconnect the braided line from it and then use a 1/8th drill bit to drill out the restriction in the line. Its an easy mod.
Heres a link. http://www.installuniversity.com/ins...sity/index.htm
Pretty much you have to just pull the master cylinder out of the car and disconnect the braided line from it and then use a 1/8th drill bit to drill out the restriction in the line. Its an easy mod.
Heres a link. http://www.installuniversity.com/ins...sity/index.htm
Last edited by brad8266; May 30, 2007 at 06:31 AM.
clutch master thanks i thinks its a little late i blew the cluch tonight at the track should i get a centerforce?
Originally Posted by brad8266
Its called the drill mod and all you do is drill out the little restrictor that is in the braided line that runs from the master to the slave. It will help in clutch engagement especially when racing. It should be a first mod for everyone with a manual trans.
Pretty much you have to just pull the master cylinder out of the car and disconnect the braided line from it and then use a 1/8th drill bit to drill out the restriction in the line. Its an easy mod.
Heres a link. http://www.installuniversity.com/ins...sity/index.htm
Pretty much you have to just pull the master cylinder out of the car and disconnect the braided line from it and then use a 1/8th drill bit to drill out the restriction in the line. Its an easy mod.
Heres a link. http://www.installuniversity.com/ins...sity/index.htm
Originally Posted by daveofhiram
thanks i thinks its a little late i blew the cluch tonight at the track should i get a centerforce?
