Transmission Crossmember rear bolt holes?
07-12-2007 | 07:54 PM
#1
Transmission Crossmember rear bolt holes? Hey,
In the center of the aft end of the transmission crossmember there are two bolt holes with nothing bolted to them ('00 WS6, M6). Are they for the 4L60E? My Y-pipe is hitting against them so I'm going to cut them down with an angle grinder.
Is this a bad idea?
Thanks!
In the center of the aft end of the transmission crossmember there are two bolt holes with nothing bolted to them ('00 WS6, M6). Are they for the 4L60E? My Y-pipe is hitting against them so I'm going to cut them down with an angle grinder.
Is this a bad idea?
Thanks!
