Replacing Clutch. What bolts to replace?
Thread Starter
Joined: Jan 2003
Posts: 1,293
Likes: 0
From: ThirteenHundredPostsVille, CA
Replacing Clutch. What bolts to replace? Carbon Spec Stage III is going in my car and in the instructions it suggests replacing bolts if they are 2+ years old. Wondering if anyone as all the GM part numbers I would need to order all the bolts?
On The Tree
Joined: Nov 2002
Posts: 102
Likes: 0
From: Sachse, Texas
Re: Replacing Clutch. What bolts to replace? I don't have any part numbers, but I do have the quanity of bolts you will need. At the very least it should help the parts department at the dealer narrow it down.
8 15mm = Trans to Bell Housing
8 13mm = Bell Housing to Engine
6 13mm = Pressure Plate to Flywheel
6 15mm = Flywheel to Crankshaft
I think that's all. Got it off www.installuniversity.com. On the Mcloed Clutch install document.
8 15mm = Trans to Bell Housing
8 13mm = Bell Housing to Engine
6 13mm = Pressure Plate to Flywheel
6 15mm = Flywheel to Crankshaft
I think that's all. Got it off www.installuniversity.com. On the Mcloed Clutch install document.
