9 sec T56
9 sec T56 How many are out there and what all do you have done to the trans??? I have a built trans in my WS-6 and I am shooting for 9sec rowing the gears. What do you guys think?
12 Second Club
Joined: Sep 2005
Posts: 4,273
Likes: 0
From: Bucks County, Pa.
Tim Tosto (Tosto Racing, I believe is the screen name) on here has gone mid 9s rowing, I KNOW there are others as well. You could ask him, or just contact Six Speeds Inc. (one of our sponsors).
7.97 was a twin turbo Viper with a t56 transmission. That was over a year ago and was done by Under Ground Racing in NC.
No you dont want to drive a face plated trans on the street. Similar to nascar yes.
Amber
No you dont want to drive a face plated trans on the street. Similar to nascar yes.
Amber
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Faceplated transmissions shift awesome on the upshift but will not down shift for crap . If you wanting a strip only box , its not a bad way to go . I would also recommend leaving out the 5/6 assembly as well since you won't need it anyways . If you have even a small thought of running it on the street , do not go faceplated .
As for a 9 second T56 , the real weak link is the mainshaft when you start getting up in that range so most people upgrade to a 31 spline Viper mainshaft and have the tailhousing bored out to accept the larger bushing and seal .
As for a 9 second T56 , the real weak link is the mainshaft when you start getting up in that range so most people upgrade to a 31 spline Viper mainshaft and have the tailhousing bored out to accept the larger bushing and seal .
