Is this part availabe ?
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: West Haven, CT
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Is this part availabe ?
2000 T/A with 6-speed. The white clip thats on the hydraulic line that plugs into slave. Is the clip available new ? I ned to get my line out and pull my tranny and the clip is gone. Can't get an a/c disconnect fitting on there cause of ridge on bronze piece.
Thanks
Ron H.
Thanks
Ron H.
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
No it is not availble seprately.
you can get plastic bushing & use those to get it open with though.
read this thread;
https://ls1tech.com/forums/showthrea...9&page=2&pp=20
you can get plastic bushing & use those to get it open with though.
read this thread;
https://ls1tech.com/forums/showthrea...9&page=2&pp=20
#3
Launching!
Thread Starter
iTrader: (3)
Join Date: Jul 2005
Location: West Haven, CT
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
No it is not availble seprately.
you can get plastic bushing & use those to get it open with though.
read this thread;
https://ls1tech.com/forums/showthrea...9&page=2&pp=20
you can get plastic bushing & use those to get it open with though.
read this thread;
https://ls1tech.com/forums/showthrea...9&page=2&pp=20