tailpipe

iTrader: (4)

if the car is say...sitting at an idle, and i move the shifter towards 3rd gently, it grinds, same with 4th. it grinds also. along with the fact that now it seems to get stuck in 4th all too often. happened out of nowhere (casual driving)
this pretty much all started last night.
any ideas???

chuckyt1

iTrader: (33)

What's it do when driving? Any grinding then? Might have lost the keys in the slider...

Don't grind fourth. That's an expensive gear to replace, (it's the input shaft).

Shoot a pm to, or call, Amber at SixSpeeds Inc. She is very helpfull and will answer all your questions.

tailpipe

iTrader: (4)

umm while driving, its does grid going into 3rd and 4th but ive stopped putting it in 4th cuzz it just gets stuck

_JB_

iTrader: (33)

Be ready for an expensive rebuild, mine did the same thing.

SSMOKIN_Y2KSS

iTrader: (5)

im interested to see if anyone has a good explanation for this because today mine started to do the same thing but it gets stuck in 3rd mainly 4th occasionally..and mines built too! im pissed

tailpipe

iTrader: (4)

anyone got a price range for a rebuild

chuckyt1

iTrader: (33)

http://0174de9.netsolstores.com/inde...ATS&Category=2

thesource

iTrader: (60)

Definately sounds like the keys in the slider assembly are fubarred and need to be replaced along with the syncro rings and update the shift fork as well .

_JB_

iTrader: (33)

I ended up replacing 1-4 gear, rear main shaft, and using sixspeedsinc's 5A rebuild kit with bronze 5-6 fork pads. Good luck!